To obtain the maximum benefit from Tend Skin in conjunction with professional hair removal methods, we recommend the following steps:

1. Clients with pre-existing ingrown hair problems should be sold a bottle of Tend Skin for home use. Advise the client to apply the product several times daily prior to hair removal. Ideal times to use the product would be after showering in the morning and before retiring at night. This approach will permit lifting of existing ingrown hairs prior to waxing or electrolysis, making hair removal in
the salon much cleaner and neater.

2. After waxing or electrolysis, apply Tend Skin to the area. After 15-20 minutes all skin redness should be gone. Your client wilt leave your salon with skin free from redness. There may be slight
stinging when applying Tend Skin after waxing or electrolysis, but it will pass almost immediately. If it does not simply apply a cool damp cloth to the area.

3. Tend Skin will not be needed for at least a week after waxing/electrology, as it takes time for hair to grow enough to form an "ingrown hair". Then, the client should be instructed to apply Tend Skin 2-3 times weekly to maintain ingrown hair free skin. Weekly application of the product may have to be adjusted for the individual depending on the skin and hair types involved.

Note: In cold climates you may find some crystal formation in the bottle. This is normal and does not affect the product's performance. The crystals will disappear after several days at room
temperature.

For best results - apply with cotton ball or cotton square. African-American men who suffer with Pseudofolliculitis Barbae have special product use requirements. Most men with PFB utilize electric clippers like a barber uses to shave the neck, instead of a razor.

African-American men and even Caucasian men (15-20%) with PFB must be educated regarding shaving technique. These men are often afraid to use a razor blade on their faces. We learned from men in the military who are required to shave daily how to get the best results. Here is what we learned:

Instruct these clients to use a simple edge razor. Tell them to discontinue using clippers. Single edge razor must be discarded after 2-3 uses! This is critical. Dull blades make razor bumps!

They must apply Tend Skin before and after shaving. These steps will insure satisfactory results.

"The product worked at first but then stopped working." In this case, the client has likely used the product only once, achieved results, but didn't realize he had to use it daily.
The product will not work properly in many cases if electric razors or clippers are used.

Tend Skin used regularly, will prevent future ingrown hairs and "razor bumps". Tend Skin requires no mixing. No special preparations before use.
You can now use your preferred method of hair removal.

Tend Skin is the solution for:

Ingrown hairs, elimination and prevention. Razor burn

Electrolysis redness and ingrown hairs Waxing redness

TEND SKIN is used on:
Woman's legs, bikini lines, underarms, and face's (where applicable)

Please read on for specific descriptions of the above.
First Application: Shave or wax first, then apply the TEND SKIN
Product.

For those with "razor bumps" (PFB): Apply Tend Skin two to three times per day, for the first 3 days. Once the skin clears (usually in 48 hours), you may apply it Once daily to maintain clear skin. . We strongly advise using a double edge disposable razor, replacing it after two shaves. Applying before shaving will decrease the burning and itching associated with PFB. Applying after shaving or at night will work the Best..

For Ingrown Hair:

Applying TEND SKIN to existing ingrown hairs will clear 24 to 48 hours. Problem area's may be spot treated with a Q-Tip. DO NOT Tweeze or pick at ingrown hairs. Once the hair is well above the skin. Then dip tweezers into the TEND SKIN and remove. Re-spot with a Q-Tip.

For use with Electrolysis:

Applying after electrolysis will quench the burning and eliminate the redness within minutes. Applying several times weekly will prevent ingrown hair formation.

For use with waxing:

(Eyebrow) Apply Once after hair removal, apply a cool cloth if stinging occurs.
(Chin) Apply Once after Hair removal. A sunscreen is recommended to prevent Hyper Pigmentation.

(Bikini, Underarm, and Legs) Apply Tend Skin after waxing to eliminate redness within minutes. Apply Once a week as maintenance to prevent ingrown hair formation. Some women will feel minor stinging if applying right after waxing. Apply a cool damp cloth to stop stinging. Apply TEND SKIN several times weekly to prevent ingrown hair formation. (If drying occurs apply a moisturizer ...see warning page)

Method Of Application: Tend Skin should be applied with a quilted cotton square. Rinse hands after use. The product may be rubbed on, thus acting as a cleaner. It also acts as an astringent for oily skin.

TEND SKIN will exfoliate and soften rough dried skin on Your hands, and feet.

Some peeling will occur. Apply a moisturizer should dryness occur.
Note: Crystallization may occur in colder climates. This is normal. Simply lay the bottle on its side, then shake Vigorously as the crystals melt, may take up to
48 hours.

Special Note: Replace cap tightly after each use. Or chemical breakdown will occur. (Vinegar smell and White powder at neck of bottle)

Tend Skin used regularly, will prevent future ingrown hairs and "razor bumps". Tend Skin requires no mixing. No special preparations before use. You can now use your preferred method of hair removal.

Tend Skin is the solution for:

Ingrown hairs, elimination and prevention.
Razor bum or bumps (PFB)
Electrolysis redness and ingrown hairs
Waxing redness

TEND SKIN is used on:
Men's Face's, neck's (front and back), back's, chest, and head

Please read on for specific descriptions of the above.
First Application: Shave or wax first, then apply the TEND SKIN Product.

For those with "razor bumps" (PFB): Apply Tend Skin two to three times per day, for the first 3 days. Once the skin clears (usually in 48 hours), you may apply it Once daily to maintain clear skin. . We strongly advise using a double edge disposable razor, replacing it after two shaves. Do Not Use Clippers. Applying before shaving will decrease the burning and itching associated with PFB. Applying after shaving or at night will work the Best. (Do not wash off TEND SKIN) After Shave is not needed after Use of TEND SKIN.

For Ingrown Hair:

Applying TEND SKIN to existing ingrown hairs will clear 24 to 48 hours. Problem areas may be spot treated with a Q-Tip. DO NOT tweeze or pick at ingrown hairs. Once the hair is well above the skin. Then dip tweezers into the TEND SKIN and remove. Re-spot with a Q-Tip.

For use with Electrolysis:

Applying after electrolysis will quench the burning and eliminate the redness within minutes. Applying several times weekly will prevent ingrown hair formation.

For use with waxing:

(Back and Chest)Apply Tend Skin after waxing to eliminate redness within minutes. Apply Once a week as maintenance to prevent ingrown hair formation. Some men will feel minor stinging if applying right after waxing. Apply a cool damp cloth to stop stinging. Apply TEND SKIN several times weekly to prevent ingrown hair formation. (If drying occurs apply a moisturizer...see warning page)

Method Of Application:

Tend Skin should be applied with a quilted cotton square. Rinse hands after use. The product may be rubbed on, thus acting as a cleaner. It also acts as an astringent for oily skin.

NOTE. TEND SKIN will exfoliate and soften rough dried skin on Your hands, and feet.
Some peeling will Occur. Apply a moisturizer should dryness occur.

Note: Crystallization may occur in colder climates. This is normal. Simply lay the bottle on its side then shake Vigorously as the crystals melt, may take up to 48 hours.
Special Note: Replace cap tightly after each use. Or chemical breakdown will occur. (Vinegar smell and White powder at neck of bottle)